*** Data underlying publication: Dorsal Root Ganglion (DRG) Versatile Stimulator Prototype Developed for Use in Locomotion Recovery Early Clinical Trials ***
Authors: K. Kolovou-Kouri, S. Soloukey, F. J. Huygen, B. S. Harhangi, W. A. Serdijn, and V. Giagka
TU Delft, Faculty of Electrical Engineering, Mathematics and Computer Science, Department of Microelectronics, Section Bioelectronics

Corresponding author: V. Giagka
E-mail: v.giagka@tudelft.nl

Shared under license: CC BY-NC-SA 4.0

***General Introduction***
This dataset contains the simulation files and raw data for visualising the measured voltage output of the system.

The dataset was generated in 2021. The research project was supported by the Fraunhofer Attract excellence fellowship, Fraunhofer-Gesellschaft, DE.


***Purpose of the visualisations***
Demostrate the capabilities of the developed neurostimulator system. The data collection process is described in the manuscript.

***Software***
The code is written in Matlab R2019b and the data are saved as .csv files.

***Description of the data in this dataset***
 - 'stim_biphasic.m': Script that plots the measured voltage output of the neurostimulator. 
 - 'stim_sequence.m': Script that shows the capabilities of the neurostimulator and the versatility of the output stage when measuring the voltage at the output. 
 - '6mA-single-2el.csv': Data needed for the stim_biphasic.m file.
 - 'allmA-el8-511Ohm_1.csv': Data needed for the stim_sequence.m file.
 - 'allmA-el8-511Ohm_2.csv': Data needed for the stim_sequence.m file.
 - '6mA-el8-skip-511Ohm_1.csv': Data needed for the stim_sequence.m file.
 - '6mA-el8-skip-511Ohm_2.csv': Data needed for the stim_sequence.m file.
 - '6mA-el8-ramp-511Ohm_1.csv': Data needed for the stim_sequence.m file.
 - '6mA-el8-ramp-511Ohm_2.csv': Data needed for the stim_sequence.m file.
